Calculadora de Lago Grátis — Litros & Lona (2026)

Como Usar Esta Calculadora

1. 1Enter the maximum length of your pond in feet.
2. 2Enter the maximum width in feet.
3. 3Enter the deepest depth in feet — 2 to 3 feet for water gardens, 3 to 4 feet for koi ponds.
4. 4Select the closest shape: rectangular, oval, or kidney.
5. 5Click Calculate for volume, liner size, pump capacity, and underlayment needs.

Sobre Este Material

A backyard pond is an excavated water feature lined with a flexible or rigid material to hold water for ornamental fish (koi, goldfish), aquatic plants, or simply as a decorative focal point. Pond construction involves four key components: the liner, the pump and filtration system, the underlayment, and the surrounding edging. Pond liners are the most critical component. EPDM rubber (45 mil) is the industry standard — it is flexible, UV-resistant, fish-safe, and lasts 20 to 30 years. A typical 45 mil EPDM liner costs $0.50 to $1.00 per square foot. PVC liners (20 mil) are cheaper at $0.25 to $0.50 per square foot but have a shorter lifespan of 10 to 15 years and are less puncture-resistant. Preformed rigid liners (polyethylene or fiberglass) are available for small ponds up to 500 gallons and cost $150 to $600 depending on size. Liner size is calculated by adding twice the depth plus 2 feet of overlap to both the length and width. The overlap provides material to anchor the liner edges under rock, gravel, or soil. Always order a liner at least 2 feet larger than the calculated size to account for shelf ledges and irregular shapes. Pumps circulate the water through a filtration system and power waterfalls or fountains. The standard rule is to circulate the entire pond volume once every 2 hours — a 1,000-gallon pond needs a 500 GPH pump minimum. For koi ponds, the recommended turnover rate is once every hour due to the higher biological load. Submersible pumps are suitable for ponds up to 2,000 gallons; external pumps are more efficient for larger installations. Pump costs range from $50 for a 500 GPH submersible to $400 or more for a 4,000 GPH external pump. Filtration systems include mechanical filtration (skimmer boxes that remove leaves and debris) and biological filtration (bio-falls or pressurized filters that house beneficial bacteria to process fish waste). A basic combo unit costs $200 to $500. Underlayment fabric (geotextile felt) is placed under the liner to protect it from roots, rocks, and sharp objects. Sand (2-inch layer) can be used as an alternative on smooth excavations. Underlayment costs $0.10 to $0.25 per square foot. Edging materials (flagstone, boulders, or manufactured stone) conceal the liner edge and create a natural appearance. Budget $200 to $1,000 for edging materials depending on the pond perimeter and stone type.

Dicas de Instalação

• •Locate the pond where it receives 4 to 6 hours of partial sunlight — full sun promotes excessive algae growth.
• •Call 811 to mark underground utilities before digging — this is a free service and a legal requirement in most areas.
• •Dig shelves at 12 inches deep around the perimeter for marginal aquatic plants before excavating the full depth.
• •Place a 2-inch layer of sand or geotextile underlayment fabric over the entire excavation before laying the liner.
• •Fill the pond slowly with a garden hose, smoothing the liner as it fills — wrinkles are much harder to fix once full.
• •Run the pump and filter for at least 2 weeks before adding fish to allow beneficial bacteria to establish.

Erros Comuns a Evitar

• ⚠Undersizing the liner — always calculate length + (2 × depth) + 2 ft for each dimension. A liner that is too small cannot be fixed.
• ⚠Skipping the underlayment — roots, rocks, and sharp objects puncture liners from below. A single hole drains the entire pond.
• ⚠Undersizing the pump — poor circulation leads to stagnant water, algae blooms, and fish kills. Size for full turnover every 2 hours minimum.
• ⚠Not providing enough depth — ponds less than 24 inches deep can overheat in summer and freeze solid in winter, killing fish and plants.
• ⚠Building too close to trees — falling leaves create organic buildup that depletes oxygen. Keep ponds at least 10 feet from deciduous trees.

Calculadoras Relacionadas