Calculadora de Vigas de Piso

Quantas vigas de piso eu preciso? Calculadora grátis para espaçamento de 40 cm e 60 cm entre eixos — calcula por largura do cômodo.

Ad — 728x90 — Leaderboard
Insira Suas Medidas

Como Usar Esta Calculadora

  1. 1Enter the total room width perpendicular to joist direction.
  2. 2Choose your on-center spacing (16" is standard for living spaces).
  3. 3Click Calculate.
Ad — 728x90 — Mid-Page

Sobre Este Material

Floor joists are the horizontal structural members that span between bearing walls or beams to support the subfloor and all live and dead loads above. Standard dimensional lumber sizes are 2x8 (spans up to 12 feet), 2x10 (up to 15 feet), and 2x12 (up to 18 feet) at 16-inch on-center spacing, though exact spans depend on species, grade, and load requirements. Engineered options include LVL (laminated veneer lumber) joists for heavy loads or long spans, and I-joists (TJI) for consistent depth and lightweight handling. I-joists are available in depths from 9.5 to 16 inches and can span over 20 feet. Floor joists are typically spaced 16 inches on center for standard residential construction, providing a stiff, bounce-free floor. The 24-inch spacing is acceptable with thicker subfloor but produces a less rigid floor. Dimensional lumber joists cost $8 to $25 each depending on size, while I-joists run $3 to $6 per linear foot.

Dicas de Instalação

  • Crown all joists the same way (crown up) for a flat floor.
  • Use joist hangers at beam connections.
  • Block joists at bearing points.

Erros Comuns a Evitar

  • Not crowning joists consistently — causes uneven floors.
  • Under-sizing joists for the span — always check span tables.
  • Forgetting to add the extra joist at the start.

Perguntas Frequentes

Calculadoras Relacionadas